The Max4 PRO is a 38″ long and 10.6″ wide deck. It has the good old fashioned ‘vanguard’ shaped deck that we’ve all seen before (and love).
It’s made of 8 layers of Canadian Maple with a layer of carbon fibre coating. It looks clean and sleek.
This material causes the deck to go against what a vanguard is all about. The deck on the Maxfind is really stiff with only an ever-so-slight flex to it. And it has a very shallow concave.
It’s deck is the total opposite to some of its competitors, including the Exway Flex.
The enclosure is one of my favourite features on the Max4 PRO.
It’s a single metal enclosure, rather than having the popular two-enclosure setup. It has a stone finish and it doesn’t scratch up too easily.
The thing I like most about the enclosure is the quick swap battery system. It is super easy to use.
You just unscrew a little tap, slide the enclosure off and pull out the battery. Fast fingers could swap a battery out in less than 60 seconds.
MaxFind claim that their eboard has an IP65 waterproof rating, I checked, their enclosure is metal on metal with gasket so I would not be very hesitant about riding the Max4 Pro through wet weather.
The Max4 PRO has big 96mm wheels which don’t have a durometer rating on them. However, I can tell you that they are quite rigid, especially on the hub motors.
The Hub motors do however have a large amount of PU that sit between the motors and the ground so that helps to absorb some vibrations from the road, however, it still feels like a hub Motor eboard when you’re riding.
The trucks are another of my favourite things about this eboard. They are 45-degree, but more importantly, they are made with the same manufacturing process that premium skate truck companies make their high-end products. They are forged, rather than cast, so they are super strong. And the are CNC machined to make them really precise.
And while riding, you can feel that quality comes through slightly. To get the full potential of these trucks, you’ll have to play around with the setup of bushings and riser pads.
I don’t have much to say for the bushings. They’re there.
As for the riser pads, well they look like 1/3″ pads, but the truck plate has been tightened up so much that the pads are squished up so much that they bulge out from underneath the truck plate. I’ll be loosening off the trucks to maximise the effectiveness of the risers in the future.
The Max4 PRO is running dual 750W hub motors, bringing it to a total of 1500W.
And they’re OK. They get the job done. Max4 PRO they can accelerate to their top speed in 8 seconds.
The Max4 Pro is loaded up with the latest Hobbywing ESC and as always, it is awesome. It has extremely smooth acceleration and braking, both of which won’t be able to through you off. It’s very responsive and the board acts exactly how you expect it to when you move the thumbwheel.
It has 4 riding modes, reverse and cruise control.
The battery is a Samsung 36V 4.4Ah pack with 158.4Wh capacity and is specced to get up to 15 miles (24km) of range. I put that to the test down below.
The top speed I managed to hit was 26mph (42kmh).
The thing is, I weigh 198lbs (90kg) so that will have an effect on the absolute top speed.
But I also want to point out that when you lay the eboard upside down and hit the throttle, the max speed the remote can do is 26mph (42kmh). And that’s without any resistance at all.
Here we go, this is pretty much everyone’s most sought after test. The range test.
I got up to 15 miles (25km), which is within the scope of the real test range marked on MAXFIND official website. ( Heavier a rider means the board has to use more energy to get itself moving, that is to say, the rider's weight will affect the speed and range)
So why did I get such a low range? Well, there’s a few things at play here.
For starters, I’ve already mentioned my weight, please don’t embarrass me by asking me to say it out loud again…
Obviously, heavier a rider means the board has to use more energy to get itself moving.
On top of that, I did multiple acceleration tests and I did quite a lot of carving which puts extra stress on the motors.
Lighter riders and those who want to cruise around at a more comfortable pace of say 25-30kmh, you’re going to get a lot more range. It’s going to be different for every eskater.
From a speed of 12mph (20kmh), I slammed on the brakes and it took me 16.4′ (5m) to come to a complete stop.
From 18mph (30kmh), it took 32.8′ (10m).
Those distances are what i expect from a hub motor eboard. Most places that have already legalised electric skateboarding have a speed limit of about 15mph (25kmh) so you’re in the ballpark of about 32.8′ (10m) braking distance.
That’s probably enough to get you out of most sticky situations if you’re paying attention.
For my test, I rode up a hill that had a grade of up to 30% at its steepest and it putted along at about 16kmh. At that steepness, it never felt like it was going to give up, but it didn’t feel like it was powering up either.
Overall, the Maxfind Max4 Pro was considerably enjoyable to ride. It requires a little bit of tweaking here and there to get it up to scratch. It doesn’t come set up to its optimum out of the box.
For those that prefer a stiff deck, I think this has a nice sweet spot between being stiff and being able to absorb as much of the vibrations as possible. Don’t get me wrong, you’ll still feel the road beneath your feet.
Another great aspect of having a stiff deck is the ability to slide. I’m not a great slider, but I gave it a whirl and I was surprised at how much more control over the deck I had as oppose to when riding a flexible deck.
It’s definitely geared towards commuters and beginners who maybe want to learn how to slide.
We believe wholeheartedly in producing the best hub motor electric skateboards and that hub motors are the future of electric skateboarding.
An electric skateboard that is quiet, powerful and requires the lowest amount of maintenance as possible will win the eskate war.
But, hub motors don’t have the power that belt-drives offer just yet. We will see some solid R&D in the future to bring MaxFind dreams to fruition.
Simply put, humanity is living in the golden age of rideable technology, and we love it. In fact, there are almost too many rideable to keep track of, and the gear seems to get crazier and more advanced with each passing month. So, to help you navigate the increasingly crowded marketplace, we’ve put together this list of the best electric skateboards you can buy right now.
We got our hands on some of the mightiest e-boards in the industry, looking at criteria like durability, battery life, ease of use, and price.
To catch up to the rest of the market, Maxfind has released 5 new electric skateboards in relatively short order. We’ve looked at the Maxfind Max4 PRO, and today, we are looking to review the Maxfind Max2 PRO Dual – a $569 shortboard.
You never get to make a first impression twice, and the Max2 PRO gets its first impression right.You can see right away how Maxfind puts a lot of effort into making sure the board looks good and feels premium at the same time.